1. You are here:  
  2. Home
  3. Publications
  4. Pre-published methods

Pre-published methods

CIPAC Methods are available on a per-method basis, as long as they are not yet published in a Handbook. CIPAC charges a nominal fee per method.

You can order and pay the methods in our webshop. After payment, you can download the methods in the shop.

Downloads/webshop


Terms of Use

By ordering one or more of these methods, the user accepts the conditions of use as follows:

  • These are draft methods and are subject to revision without further notice.
  • These methods will appear in revised and edited form in CIPAC Handbook R presumably in the year 2028. The pre-published methods expire as soon as they appear in printed form in the CIPAC Handbook R.
  • The CIPAC copyright and disclaimer applies to all pre-published methods.


Available methods

CIPAC number
Name
Description

Status

1026

S-methoprene

The normal phase HPLC method (CIPAC/5359) for the determination of S-methoprene in technical materials was accepted as full CIPAC method after the elimination of the results of laboratory 9 as the recalculated results were within the relevant criteria (ISBN 978-1-911009-76-4).

full

994

Broflanilide

The extension of the reversed phase HPLC method 994/TC/M/3 (CIPAC/5388) to the determination of broflanilide in UL formulations was accepted as full CIPAC method (ISBN 978-1-911009-86-3).

full

415 + 570 + 33

Bifenthrin + Chlorfenapyr + PBO

The capillary gas chromatographic method with split injection, using dioctyl benzene-1,2-dicarboxylate as internal standard (CIPAC/5390), for the determination of bifenthrin+chlorfenapyr+PBO in in long-lasting insecticide treated net (LN) was accepted as full CIPAC method considering the amendments in the description of the method (ISBN 978-1-911009-84-9).

full

508

Clethodim

The normal phase HPLC method (CIPAC/5396) for the determination of clethodim in TC, TK and EC formulations was accepted as full CIPAC method, with the remark that hexane is considered a toxic substance and with amendments of the used temperature (ISBN 978-1-911009-85-6)

full

1031

Coronatine

The reversed phase HPLC method (CIPAC/5382) for the determination of coronatine in TC and SL formulations was accepted as full CIPAC method (ISBN 978-1-911009-83-2).

full

307

Gibberellic acid

The reversed phase HPLC method (CIPAC/5378) for the determination of gibberellic acid in TC formulations was accepted as full CIPAC method (ISBN 978-1-911009-81-8)

full

494

Tebuconazole

The capillary gas chromatographic method (CIPAC/5374) for the determination tebuconazole in TC, EC, EW, WP and SC formulations was accepted as full CIPAC method with the clarifications concerning the split ratio used and the right number of eliminated laboratories (ISBN 978-1-911009-80-1).

full

790

Tembotrione

The reversed phase HPLC method (CIPAC/5380) for the determination of tembotrione in TC, SC and OD formulations was accepted as full CIPAC method (ISBN 978-1-911009-82-5).

full

MT 148.2

Pourability

The revision of methods MT 148 and MT 148.1 (CIPAC/5355) to combine into a single method MT 148.2 for the determination of pourability of formulations was accepted as full CIPAC method with the remark that MT 148.2 supersedes MT 148 and MT 148.1 (ISBN 978-1-911009-87-0).

full

MT 203

Density of solids and liquids with automated systems

The method intended to determine the density of solids and liquids (CIPAC/5356) with automated systems with two different procedures (gas pycnometer for solids, oscillating density meter for liquids) was accepted as full CIPAC method (ISBN 978-1-911009-88-7).

full